Direct RF Sampling vs Superheterodyne: Choosing an RFSoC Front End
Direct RF sampling now reaches 18 GHz. How to choose between direct sampling and superheterodyne for an RFSoC front end, and the filter, clock and decimation specs that choice sets.
Back to top
Today’s observation applications, including geological and hydrological surveying have advanced immensely with the use of drones. Drones can use high-resolution camera systems to acquire massive amounts of images and produce 3D visualizations. However, these visualizations require high-bandwidth, low-latency data acquisition and storage.
High-bandwidth, low-latency solutions come with tradeoffs. To find the right solution for 3D visualization, consider the following requirements:
Drones often require small and light form factor and are highly constrained by size. Understand what on-board functionality is imperative to the application.
In addition to size constraints, mechanical vibration may be cause for concern. Eliminating vibration during flight is impossible, and thus must be accommodated for in the hardware selected to capture and store images. Design engineers must understand exactly how much vibration can be tolerated and consider mounting features that minimize vibration.
Flight time, power capacity of the drone, and other factors affect overall storage capacity demands. Recently, NVMe solid-state drives (SSDs) have expanded from 500 GB capacity, with access speeds of about 500 MB/s, to 2 TB drives with access speeds of about 3000 MB/s. Taking advantage of these advancements allows for a higher-end solution, if needed.
Learn what other requirements come into play with large-scale drone-based 3D visualization applications and how Fidus achieved high-bandwidth, low-latency data acquisition, transfer, and storage for an aerospace company.
Direct RF sampling now reaches 18 GHz. How to choose between direct sampling and superheterodyne for an RFSoC front end, and the filter, clock and decimation specs that choice sets.
At 112G PAM4, most channel margin is lost at the transitions, not along the trace. Fidus Signal Integrity Architect Dr. Syed Bokhari explains how stackup, vias, BGA breakout and connector footprints decide 112G and 224G margin, and how COM proves it.
An SRAM adaptive SoC puts configuration scrubbing, interrupt recovery and TMR into your satellite payload design. A flash-based rad-hard FPGA removes that work and caps compute. Here’s how to scope it before choosing the part.
Trust us to deliver on time. That’s why 95% of our customers come back.